To log out of Twitter on Windows 10, first open the Twitter app. Once open, click on your profile picture and then select the "Log Out" option. When you select the "Log Out" option, you will be logged out of your Twitter account.

Windows 10 supports NDIS 6.4. NDIS 6.4 is included in Windows 10, so you do not need to download and install it separately.

1. Check if Your PC is Connected to the Network: First, check if your PC is connected to the network by clicking on the network icon in the taskbar. If the icon shows a yellow triangle or exclamation mark, then your PC may not be connected to the network. 2. Check the Router: If your PC is connected to a router, check the router is powered on and all the required cables are properly connected. 3. Change Network Settings: If you are unable to connect to the network, try changing some network settings. Go to Control Panel > Network and Sharing Center > Change Adapter Settings. Right-click on your network adapter, select Properties and then select the Network tab. Here, you can change settings such as IP address, Subnet Mask, DNS server and WINS server. 4. Update Network Drivers: You can try updating the network or wireless drivers in case your PC still cannot connect to the internet. To do this, go to Control Panel > Device Manager, expand the Network adapter section, right-click on your network adapter and select Update driver. 5. Reset Your Network Settings: If you have tried all the above steps and still cannot access the internet, then you can reset your network settings. Go to Control Panel > Network and Sharing Center and select “Fix problems with network adapter”. This will reset all your network settings, but you will have to reset up the connections again.

Yes, you can install Windows 10 from a USB. Before you can begin the installation, you'll need to prepare the USB drive by downloading and creating installation media using the Windows 10 Media Creation Tool. Once the USB drive is ready, you can use it to install Windows 10.

1. Restart your computer. This can often help resolve debugging errors as it clears any temporary files, processes and settings which may have caused the issue. 2. Update your Windows software. Make sure you have the latest operating system updates installed as these often resolve debugging errors. 3. Scan for malware. Use a reputable antivirus program to scan your computer for any malicious software that may be causing the error. 4. Uninstall problematic applications. If you recently installed an application before the error occurred, it could be the cause of the problem. Try uninstalling it and seeing if the error goes away. 5. System Restore. If the error persists, you may need to do a system restore to undo any recent changes to your computer. 6. Contact a professional. If none of the above steps help, you may need to contact a professional IT technician to help you resolve the issue.

1. Press Windows key + X to open the Power User menu, then select Command Prompt (Admin). 2. Type the following command and hit Enter to stop the Windows Modules Installer service: net stop TrustedInstaller 3. Now type the following command, then hit Enter to change the ownership of the folder you’re trying to modify: takeown /f <Your Folder Name> /a 4. Enter the following command to grant full access permissions to the current user: icacls <Your Folder Name> /grant administrators:F /t 5. Finally, enter this command to restart the Windows Module Installer service: net start TrustedInstaller That should fix the trustedinstaller error in Windows 10.